Ir para o conteúdo

Página não traduzida

Esta página ainda não está disponível em português. O conteúdo é apresentado em inglês.

Safety Information

Aviso

Read these instructions before connecting power or inserting a camera. Use the power adapter supplied with the docking station, or an IONODES-approved replacement compatible with the product's labeling.

Power and Handling

  • The dock requires 12 VDC, 1.5 A (18 W) at its power input. Do not select a replacement adapter by connector fit alone.
  • Keep the dock and its connectors dry. Make sure the camera and dock are completely dry before charging.
  • Do not force a camera into the cradle or twist the USB-C connector.
  • Do not use damaged power cables, adapters, or connectors.
  • Disconnect the dock from mains power before cleaning.
  • Disconnect power before moving the dock.
  • Route power and network cables so they cannot be pinched, strained, or pulled accidentally.
  • Do not open, modify, or attempt to repair the dock. Service must be performed by authorized personnel.
  • Do not pierce or scrape the product, or insert tools into its connectors.

If the dock behaves abnormally, disconnect power and contact IONODES support before using it again.

Environment

Operate the dock between 0 C and 40 C (32 F and 104 F). Keep it on a stable, dry, well-ventilated surface away from liquids and heat sources.

The dock's operating range is narrower than the camera's charging range. Follow the dock's limits when charging through the dock, as well as the camera's charging precautions.

See Device Care for cleaning and storage instructions and Troubleshooting if the dock does not operate normally.