Página sin traducir
Esta página aún no está disponible en español. El contenido se muestra en inglés.
Product Overview¶
The ION-E100-HD encodes an HDMI source for transport over an IP network. Web-based configuration tools provide remote management, and network APIs allow integration with supported video management systems.
The encoder supports two H.264 streams and an optional third MJPEG stream, with input resolutions up to 720p at 60 fps or 1080p at 30 fps. Contact IONODES for supported VMS integrations. Some advanced parameters must be configured through IONODES tools rather than the VMS. Optional microSD edge recording and video analytics depend on the device configuration.
Connections¶
Front Panel¶
| Connection | Description |
|---|---|
| VIDEO IN | HDMI video input. Supports inputs up to 720p at 60 fps or 1080p at 30 fps. |
| MICRO SD (optional) | MicroSD slot for edge recording on equipped units. Insert a FAT-formatted card to enable the associated functionality. A card is not supplied. |
Rear Panel¶
| Connection or indicator | Description |
|---|---|
| Terminal block header | Accepts the supplied terminal block socket for serial, digital input, relay, and power connections. |
| AUDIO IN / OUT | Shared 3.5 mm jack. One stereo channel carries audio input and the other carries audio output. |
| STATUS | System status indicator. See LED Status. |
| ETHERNET / PoE | Network port. Use a straight-through Category 5 or 6 RJ45 cable. The port accepts a compliant Power over Ethernet source. |
| RESET | Supports a hardware reset or a complete reset of configuration parameters to defaults. |
Advertencia
A complete reset removes the device configuration. Confirm the reset procedure with IONODES before using the button to restore defaults; a button-hold duration is not specified in this manual.
Terminal Block Pinout¶
| Pin | Signal | Direction |
|---|---|---|
| 1 | RL (relay) | Output |
| 2 | RL (relay) | Output |
| 3 | I1 (digital input 1) | Input |
| 4 | I2 (digital input 2) | Input |
| 5 | RX+ | Input |
| 6 | RX- | Input |
| 7 | TX+ | Output |
| 8 | TX- | Output |
| 9 | 12 V supply | Input |
| 10 | Ground | — |
See Serial Port Connectivity for RS-422 and RS-485 wiring.
Package Contents¶
| Quantity | Item |
|---|---|
| 1 | ION-E100-HD appliance |
| 1 | Terminal block socket, Weidmuller part number 1727660000 or 1727580000 |
Inspect the shipping box and appliance for damage and verify that all items are present. Contact your IONODES representative about missing items, damage, or defects.
The product serial-number label is on the underside of the enclosure. Provide this number when requesting service so support can identify the device and factory configuration.
Mounting screws and a microSD card are not supplied.