Aller au contenu

Page non traduite

Cette page n'est pas encore disponible en français. Le contenu est affiché en anglais.

PERCEPT Cloud integration

This PERCEPT Cloud integration guide applies to PERCEPT BC100 and BC200 body cameras.

Prerequisites

Ensure the following requirements are met before starting the integration:

  • A computer with access to the camera web interface
  • A valid PERCEPT Cloud account
  • An active internet connection on the camera
  • Firewall rules that allow the camera to reach PERCEPT Cloud; see Network requirements

Camera configuration

Complete this procedure in the body camera web interface.

  1. Log in to the camera web interface and open the Configuration page.
  2. Select the Integrations tab.
  3. Make sure Enable PERCEPT IoT Cloud is selected. Click Save if prompted.
  4. Click Show Configuration Code.

PERCEPT Cloud configuration code

Register a camera

Continue in PERCEPT Cloud and in the organization's Devices Overview, click Add.

Conseil

A PERCEPT Cloud account can be created at perceptcloud.io if required.

PERCEPT Cloud Add Devices

Choose the onboarding mode that matches the available devices:

  • Manual Mode: Use this mode when the same computer can access both the camera web interface and PERCEPT Cloud. In the camera web interface, click Copy Configuration String, then paste the string into the Add Devices dialog.
  • QR Code Mode: Use this mode when PERCEPT Cloud is open on a separate computer, tablet, or mobile phone with a camera. In the Add Devices dialog, select QR Code Mode, then scan the configuration code displayed in the camera web interface.

Note

The displayed QR code is a configuration code and must be scanned from within PERCEPT Cloud, not with a standard QR-code reader.

After a valid configuration string is pasted or configuration code is scanned, the device preview appears.

PERCEPT Cloud Add Devices Preview

Conseil

The auto-generated Display Name can be updated to a more meaningful name for each device. That can be changed later in the device settings.

To add more cameras, repeat the applicable onboarding mode. After entering all devices, click Add X device. A confirmation dialog indicates that the camera has been successfully added. Close the dialog.

Note

Cameras may take a few minutes to complete their initial connection to PERCEPT Cloud before they are available for use.

PERCEPT Cloud Add Devices Success

Network requirements

The following network ports and URLs must be allowed for the camera to communicate with PERCEPT Cloud. Although most networks allow outbound connections by default, some may require special configuration. Consult the organization's IT department when necessary.

Protocol / Ports Direction Reason
UDP / 53 Outgoing DNS queries
UDP / 123 Outgoing Time synchronization
TCP / 443 Outgoing TLS traffic
UDP / 49152-65535 Outgoing Media streaming (direct)
UDP & TCP / 3478 Outgoing Media streaming (TURN)
Domain name Reason
global.azure-devices-provisioning.net Device management
global-device-provisioning.api.east-us.perceptcloud.net Device management
prod-east-us-iot-hub.azure-devices.net Device management
perceptprodeastus.blob.core.windows.net Device maintenance
firmwaresdeveastus.blob.core.windows.net Firmware updates
live-*.millicast.com Media streaming (direct)
turn-*.dolby.io Media streaming (TURN)