Introduction

For the most current information, always refer to the online documentation. Printed or exported copies may not reflect recent documentation updates.

Features, workflows, screenshots, and user interface elements may vary depending on the software version, hardware options, and system configuration.

About This Manual

This manual is adapted from the ION-E100-HD User Manual supplied with the product. It describes the legacy device interface and ION Configuration Tool (ICT). Screenshots are reproduced from that manual; some show other ION device models as examples of the shared tools.

Note

The documented web application uses Microsoft Silverlight. It is a legacy interface and should not be assumed to work in current browsers. Confirm a compatible management environment for the installed firmware before relying on these procedures.

Warranty

The product is covered by the IONODES Limited Hardware Warranty. Warranty terms, coverage periods, and conditions may change over time. Refer to the online warranty statement for the most current information.

See https://www.ionodes.com/limited-hardware-warranty/.

Important Information

Throughout this manual, the following message types are used to highlight important information:

Warning

Failure to follow these instructions could result in equipment damage, loss of data, or service interruption.

Note

Provides additional information that may help complete a task successfully.

Tip

Provides recommendations and best practices.

Illustrations and Screenshots

Screenshots and illustrations are provided for reference. Actual screens and diagrams may vary by software version, hardware platform, configuration, and enabled integrations.