Skip to content

Installation

Equipment Installation

The ION-R200 can be installed on a flat surface or mounted using the included VESA hardware.

Desktop Placement

Place the ION-R200 on a flat, stable surface such as a desktop. Position the unit to allow cable clearance at the front and rear and maintain adequate airflow around the enclosure.

VESA Mounting

The ION-R200 can be mounted behind a monitor using the included VESA mounting bracket and screws.

ION-R200 VESA mounting bracket

  1. Using the four small black screws included in the box, attach the VESA bracket to the back of the monitor.

    Attach the VESA bracket to the monitor

  2. Attach the two slightly larger black screws to the bottom of the ION-R200 chassis.

    Attach the mounting screws to the ION-R200 chassis

  3. Slide the ION-R200 onto the VESA mounting bracket.

    Slide the ION-R200 onto the mounting bracket

Confirm that the unit is secure and that cable clearance is maintained at the front and rear.

Warning

Do not overtighten the screws as it may cause damage to the ION-R200 or VESA mount-compatible device.

Heat Dissipation

For optimal cooling, ensure adequate airflow around the device during operation.

Do not cover the heatsink fins or otherwise obstruct airflow around the device.

Heat dissipation may be improved by mounting the device to a larger metal surface, such as a shelf, enclosure, or monitor mounting bracket, or by providing additional airflow around the device.